AGC 150 PMS Lite
Simple power management controller
Compatible with a wide range of ECUs and engines, the robust AGC 150 PMS Lite is ideal for setting up and operating simple power management systems in off-grid plants with up to 127 gensets.
With the AGC 150 PMS Lite, you can quickly configure simple power management systems with up to 127 gensets. Designed for off-grid plants, the robust controller protects and controls a genset and the genset breaker, and it can operate in temperatures from -40 to +70 °C (-40 to +158 °F). It is compatible with a wide range of ECUs and engines and meets Tier 4 (Final)/Stage V requirements.
Quick configuration and complete overview
You can configure your plant from the display without needing a PC with utility software. Interconnected AGC 150 PMS Lite devices use CAN bus connections to automatically detect each other and assign IDs. When the plant is running, gensets are started or stopped according to the load and priority, and they share the load equally. You can see the total available and consumed power, along with operating information for all gensets in the plant.
Easy to mount, easy to use
The AGC 150 PMS Lite offers a wide selection of configurable inputs and outputs. The IP65 certified front-mounted controller is easy to mount, and easy to use thanks to its graphical display unit available in 11 languages. You can monitor and control the exhaust after-treatment system from the display.
AGC 150 PMS Lite controllers are not compatible with other AGC 150 variants, but you can augment your plant design with products including Insight remote monitoring, DVC 350 digital voltage controllers, and AOP additional operator panels.
Other AGC 150 variants
The AGC 150 Mains controller can synchronise one or two breakers (mains breaker and tie breaker) plus protect and monitor the utility.
The AGC 150 Genset controller contains all necessary functions for control and protection of a genset. The slim design makes the genset controller suitable for paralleling even small gensets thus the AGC 150 is integrable in nearly all types of gensets.
The AGC 150 Stand alone controller for controlling non synchronising applications with all the necessary functions for genset protection. It stands out for its reliability and operator-friendliness.
The AGC 150 BTB controller can synchronise one breaker, protect and monitor the busbar. In total, DEIF’s power management system can handle eight bus tie breakers.
The AGC 150 Engine Drive controller provides engine protection and controls engine start and stop sequences, including simple fixed- and variable speed functions for pump applications.
The AGC 150 Hybrid controller comes with all the necessary functions for protection and control of a hybrid installation with PV and genset.
The AGC 150 Remote Display unit provides access and control of any master controller in the AGC 150 series over the local network. This provides fast incident response and operational convenience.
https://synemtechnologies.com/wp-content/uploads/2025/04/asc-150-solar-1-2.png
400
400
Synem Technologies
https://synemtechnologies.com/wp-content/uploads/2025/04/SYENEM-LOGO3.png
Synem Technologies2025-04-06 14:55:092025-04-08 16:55:39MVR-200 series
https://synemtechnologies.com/wp-content/uploads/2025/04/asc-battery-.png
400
400
Synem Technologies
https://synemtechnologies.com/wp-content/uploads/2025/04/SYENEM-LOGO3.png
Synem Technologies2025-04-05 16:02:272025-04-08 16:14:47AGI 400
https://synemtechnologies.com/wp-content/uploads/2025/04/ags-4-mk.png
400
400
Synem Technologies
https://synemtechnologies.com/wp-content/uploads/2025/04/SYENEM-LOGO3.png
Synem Technologies2025-04-05 08:22:482025-04-08 16:08:13AGC-4 Mk II
https://synemtechnologies.com/wp-content/uploads/2025/03/agc-150-pms-1.png
400
400
Synem Technologies
https://synemtechnologies.com/wp-content/uploads/2025/04/SYENEM-LOGO3.png
Synem Technologies2025-03-29 17:53:412025-03-29 17:53:41iE 250 Marine
AGC 150 Remote Display